GENERIC HEATER ORDERING GUIDE

A complete heating system is composed of four parts,
1) Heater
2) Transition Duct
3) Cross Duct or Tie Duct
4) and the appropriate Track Duct, plus any desired Options.
Use our site survey form to aid you in selecting the correct heater and duct system.

1) HEATERS

HELLFIRE 900
    Stand Alone Bungalow
    High Intake Low Intake  
240Vac, single phase With EMS 16355-01 16355-03 16356-01
  Without EMS 16355-02 16355-04 16356-02
208Vac, three phase With EMS 16989-01 16989-03 16996-01
  Without EMS 16989-02 16989-04 16996-02
460Vac, three phase With EMS 16987-01 16987-03 16997-01
  Without EMS 16987-01 16987-04 16997-02
575Vac, three phase With EMS 16988-01 16988-03 16998-01
  Without EMS 16988-02 16988-04 16998-02
HELLFIRE 400
    Stand Alone Bungalow
    High Intake Low Intake  
240Vac, single phase With EMS 16698-01 16698-03 16960-01
  Without EMS 16698-02 16698-04 16960-02
208Vac, three phase With EMS 17801-01 17801-03 16961-01
  Without EMS 17801-02 17801-04 16961-02
460Vac, three phase With EMS 17802-01 17802-03 16962-01
  Without EMS 17802-02 17802-04 16962-02
575Vac, three phase With EMS 17803-01 17803-03 16963-01
  Without EMS 17803-02 17803-04 16963-02
INFERNO stand alone, 120Vac
Low Intake High Intake
17362-01 17362-02

 

2) TRANSITION DUCTS

TRANSITION DUCT assemblies for TIE DUCT systems
  Hellfire 900 Hellfire 400 Inferno
Clearance Stand Alone Bungalow Stand Alone Bungalow  
100"/8" --- --- --- --- 17363
100"/0" --- --- --- --- 17368
131"/10" 17002 --- 17031 --- ---
140"/5" 17014 --- 17032 --- ---
155"/0" 17022 17022 17033 17033 ---
TRANSITION DUCT assemblies for CROSS DUCT systems
  Hellfire 900 Hellfire 400
Clearance Stand Alone Bungalow Stand Alone Bungalow
91" 17116 -- 17113 --
104" -- 17136 -- 17135
100" 17117 17117 17114 17114
115" 17118 17118 17115 17115

3) TIE DUCTS and CROSS DUCTS

TIE DUCTS - switch point - 10" x 10" insulated - pandrol
6" base rail 5.5" base rail
18180-01 18192-01
CROSS DUCTS - Switch Point - 9" x 9"
11ga HDG 14ga SST
17104 17105

4) TRACK DUCTS

TRACK DUCTS for TIE DUCT systems only - wood tie
Length  
4' 17843
16' 17844
20' 17842
24' 17845
28' 17846
32' 17847
36' 17848
40' 17849
*Inferno rated for use with up to 24' of ductwork only
TRACK DUCTS for CROSS DUCT systems only - wood tie
Length  
4' 17106
16' 17107
20' 17119
24' 17108
28' 17109
32' 17110
36' 17111
40' 17112
*Inferno rated for use with up to 24' of ductwork only

5) OPTIONS

Flexible Gas Hose Kit 15900
Ground Rod Kit, Double 12825-03
Exterior Bungalow Light Kit, 70W Metal Halide, Vandal Resistant 16361-01
Tie Duct, 10x10, No Holes, Pandrol, 5.5" Base Rail, 1:40 Cant w Tie Straps ** 18198-01 Refer
to
order
guide
14836
Tie Duct, 10x10, No Holes, Pandrol, 6" Base Rail, 1:40 Cant w Tie Straps ** 18197-01
Tie Duct Connector Duct System - Track c/c Spacing 11' to 13' ** 14600-01
Tie Duct Connector Duct System - Track c/c Spacing 13' to 15' ** 14600-02
Tie Duct Connector Duct System - Track c/c Spacing 15' to 17' ** 14600-03
Tie Duct Connector Duct System - Track c/c Spacing 17' to 19' ** 14600-04
Insulated, 9"x9", 11 ga., Cross Duct Extension 2' 13369-01
Insulated, 9"x9", 11 ga., Cross Duct Extension 4' 13369-02
Insulated, 9"x9", 11 ga., Cross Duct Extension 6' 13369-08
Insulated, 9"x9", 11 ga., Cross Duct Extension 8' 13369-04
45 Degree Insulated Elbow 10144
Gasket Kit for 9x9 Cross Ducts 10121
Hellfire Screw Type Levelling Leg Kit (replaces bolt on legs) for Stand Alone Configuration 16357
Tie Strap, No Bolts 17877
Primary Regulator for use with Inferno 9081-0035
Switch Rod Heating Tube Kit 15653