CN RAIL HEATER ORDERING GUIDE

A complete heating system is composed of four parts,
1) Heater
2) Transition Duct
3) Tie Duct
4) and the appropriate Track Duct, plus any desired Options.
Use our site survey form to aid you in selecting the correct heater and duct system.

1) HEATERS

HELLFIRE 900
    Stand Alone Bungalow
    High Intake Low Intake w LPG Detector w NG Detector
240Vac, single phase With EMS 18001-01 18001-03 18010-01 18010-03
  Without EMS 18001-02 18001-04 18010-02 18010-04
208Vac, three phase With EMS 18002-01 18002-03 18011-01 18011-03
  Without EMS 18002-02 18002-04 18011-02 18011-04
460Vac, three phase With EMS 18003-01 18003-03 18012-01 18012-03
  Without EMS 18003-02 18003-04 18012-02 18012-04
575Vac, three phase With EMS 18004-01 18004-03 18013-01 18013-03
  Without EMS 18004-02 18004-04 18013-02 18013-04
HELLFIRE 400
    Stand Alone Bungalow
    High Intake Low Intake w LPG Detector w NG Detector
240Vac, single phase With EMS 18005-01 18005-03 18015-01 18015-03
  Without EMS 18005-02 18005-04 18015-02 18015-04
208Vac, three phase With EMS 18006-01 18006-03 18016-01 18016-03
  Without EMS 18006-02 18006-04 18016-02 18016-04
460Vac, three phase With EMS 18007-01 18007-03 18017-01 18017-03
  Without EMS 18007-02 18007-04 18017-02 18017-04
575Vac, three phase With EMS 18008-01 18008-03 18018-01 18018-03
  Without EMS 18008-02 18008-04 18018-02 18018-04

2) TRANSITION DUCTS

TRANSITION DUCT assemblies for
  Hellfire 900 Hellfire 400
Clearance Stand Alone Bungalow Stand Alone Bungalow
131"/10" 17002 --- 17031 ---
140"/5" 17014 --- 17032 ---
155"/0" 17022 17022 17033 17033

3) TIE DUCTS

TIE DUCTS - switch point - 10" x 10" insulated - pandrol
6" base rail 5.5" base rail
18180-02 18192-02

4) TRACK DUCTS

TRACK DUCTS for TIE DUCT systems only - wood tie
Length  
4' 17843
16' 17844
20' 17842
24' 17845
28' 17846
32' 17847
36' 17848
40' 17849
*Inferno rated for use with up to 24' of ductwork only

5) OPTIONS

Flexible Gas Hose Kit 13384
Ground Rod Kit, Double 12825-04
Exterior Bungalow Light Kit, 70W Metal Halide, Vandal Resistant 16361-01
Tie Duct, 10x10, No Holes, Pandrol, 5.5" Base Rail, 1:40 Cant w Tie Straps ** 18198-04 Refer
to
order
guide
14836
Tie Duct, 10x10, No Holes, Pandrol, 6" Base Rail, 1:40 Cant w Tie Straps ** 18197-04
Tie Duct Connector Duct System - Track c/c Spacing 11' to 13' ** 14600-01
Tie Duct Connector Duct System - Track c/c Spacing 13' to 15' ** 14600-02
Tie Duct Connector Duct System - Track c/c Spacing 15' to 17' ** 14600-03
Tie Duct Connector Duct System - Track c/c Spacing 17' to 19' ** 14600-04
Insulated, 9"x9", 11 ga., Cross Duct Extension 2' 13369-01
Insulated, 9"x9", 11 ga., Cross Duct Extension 4' 13369-02
Insulated, 9"x9", 11 ga., Cross Duct Extension 6' 13369-08
Insulated, 9"x9", 11 ga., Cross Duct Extension 8' 13369-04
45 Degree Insulated Elbow 10144
Gasket Kit for 9x9 Cross Ducts 10121
Hellfire Screw Type Levelling Leg Kit (replaces bolt on legs) for Stand Alone Configuration 16357
Primary Regulator for use with Inferno 9081-0035
Switch Rod Heating Tube Kit 15653